RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Hill Climb track mapping start/finish
Author Message
Reply with quote
Post Hill Climb track mapping start/finish 
Hello:

I am trying to set up lap timing for a hill climb event and have trouble with RaceCapturePro mk 3 triggering on the return trip down the hill. For this event the drivers have to recross the start line (in the opposite direction) to re-enter the pit area after each run.
I can't figure out how to prevent the unit from considering the return to pits as a new lap. Any suggestions?

I did see the lua script example using an external switch to trigger the camera and logging which is fine -- how do I do something similar to trigger the lap timers?

As a related question -- is there anyway on a track with different start and finish lines to abort a lap? While testing the above I could not figure out how to stop the lap timer and start over without either shutting off the unit or going all the way to the top of the hill to trigger the finish. The latter would not be allowed at an event of course!

Thanks!

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum