RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Raspberry Pi - error reading configuration
Author Message
Reply with quote
Post Raspberry Pi - error reading configuration 
Raspberry Pi 3b+ and 7 inch touchscreen, RaceCapture Track MK1 - bench testing
- Rasbian stretch lite 2018-03-13
- RaceCapture/Track MK1 2.17.0
- RaceCapture 1.16.0

Symptoms - on application startup, the status displays connecting/searching/Reading Configuration and an error displays at the bottom, "error reading configuration. check your connection"

1. If I run through the first time setup and specify the RaceCapture Track Mk1, a connection is successful via USB.

2. If I open a saved configuration and write it, the status changes to connected and appear to function as expected with the ability to write.

This most recent firmware/app version has maintained a much more consistent connection. Based on polled log observations, the USB stream appears to be interrupted by wifi and gps connection problems.

View user's profile Send private message
Reply with quote
Post  
It sounds like you're saying the latest firmware / app is working best for you.

However, it is worth noting that the latest firmware for RaceCapture/Track MK1 fixes an issue when reading configuration in cases where too many CAN channels were loaded (>10). Once the latest firmware is applied, this problem should go away.


_________________
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum