RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Fuel pump relay
Author Message
Reply with quote
Post Fuel pump relay 
I am running a megajolt/E with the edis 4 module and I was wondering if anyone has used a standard fuel pump relay that triggers off the tach. signal like this one ( https://www.revolutionelectronics.com/Fuel_Pump.html ) and had it work with the tach. signal pin 11 on the edis module.

I have tried using the user defined output 4 on the megajolt module to trigger a relay with no luck my understanding is that it should trigger to ground when active but I get nothing, I do however get some conductivity to ground when the unit is off but when its on I get nothing, the UDO lights in the configurator software do come on like they should. I would prefer to use the UDO's on the megajolt if someone can tell me what I am doing wrong it would have to be simple though because my electrical knowledge is limited.

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum