RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Using an AnalogX on a stock can-bus Ford gauges
Author Message
Reply with quote
Post Using an AnalogX on a stock can-bus Ford gauges 
So I am attempting to take 4 analog inputs (oil pressure, coolant temp, RPM and road speed) and convert the analog inputs to display on a stock 2005 Ford Mustang gauge display ( using the stock smart junction box). There is no ECU.
I was able, thru a connection, to get many of the can id codes for the various gauges and idiot lights. Originally I was going to use a Arduino micro with a can shield. I hate C++ programming . I have access to both the midspeed canbus and highspeed canbus. Is it possible to do this and if so what software interface would I be using?

View user's profile Send private message AIM Address
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum