RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Haltech 1500 to Mk3
Author Message
Reply with quote
Post Haltech 1500 to Mk3 
folks

I have a Mk3 and a Haltech 1300

I have the Haltech harness and I have connected

Haltech Mk3
Blue Can 2 high to Can 2 high
Blue/whit to Can 2 low
Orange white to And

12 v not connected

When I run the script to see if any data . nothin ( scripts been changed to use can )

Stop one can anyone confirm pinouts for Haltech elite to a Mk3 ?

View user's profile Send private message
Reply with quote
Post  
Did you figure this out yet? You may want to double check:

* CAN high / CAN low wiring
* Termination is enabled on both ends (RCP MK3 is software controlled, under setup)
* Baud rate is identical on both ends
* CAN output is enabled with the Haltech

We have a generic CAN bus logger that will show if anything is being read from the CAN bus:
https://wiki.autosportlabs.com/CAN_Bus_logger

Hope this helps, please let us know what you find out:


_________________
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum