RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Configurtor 3.2.1 upgrade
Author Message
Reply with quote
Post Configurtor 3.2.1 upgrade 
I have had the MJLJ for a while now , no problems.

Have just burnt the new firmware to the MJLJ box and downloaded the 3.2.1 configurator. The PC and MJLJ are reading eachother fine but now the configurator has a standing reading of 457rpm, it is not connected to the car. is this right? With 3.0.0 the revs showed 0 in the same condition. Question

View user's profile Send private message
Reply with quote
Post  
It seems the behaviour has changed in the RPM display between the two versions, but what the 3.2.1 software is showing is the minimum measurable RPM (or 'cranking' RPM). The 3.0 software was masking this and just showing zero, but the same thing was happening as well.

In other words, You're O.K. Smile Obviously, let us know if you have problems seeing the RPM reading while the engine is running.

Regards,


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum