RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
firmware upgrade problems
Author Message
Reply with quote
Post firmware upgrade problems 
Confused
Hi I am trying to upgrade the controller firmware so that i can calibrate the TPS and have switchable maps
however when I put in the command >hc08sprg etc I get a message saying this is not a valid win32 application am I doing something very stupid. Help please if anyone can

Peter

View user's profile Send private message
Reply with quote
Post  
Go to
http://www.autosportlabs.net/V3.2.x_/_2.8.x_Installing_the_new_firmware_image
and follow all the instructions (including the second sentence).

If you don't get a command screen (like a DOS screen) then substitute 'CMD.EXE' for the 'cmd' in the above instructions.

The response you have received indicates that you tried running hc08sprg etc direct from within the Run dialog box (which DOES expect any command to be a win32 application).

View user's profile Send private message
Reply with quote
Post Firmware upgrade 
Hi
Thanks for the reply I am making progress slowly and learning lots as I go. The problem I have now is that I get the message . Can't open input file mjlJunior_V3.2.1.s19 After I have entered the command >hc08sprg etc

The usual plea for help goes out again

Thanks peter

View user's profile Send private message
Reply with quote
Post  
Peter,

The program is saying that it can't find the file you're specifying in the command.

Is the MJLJ firmware image (.s19 file) in the same directory as where you're running the program? Are you typing the name exactly?

Code:

> hc08sprg.exe COM1 mjlJunior_V3.2.1.s19


*Sometimes* windows will munge the filename and the firmware image might have ".txt" tacked onto the end. If you enter the command "dir" in the command window it will show you the names of the files in the current directory. Try this, and make sure the firmware image filename is what you expect. This is also good for double-checking your spelling.

Let us know how you work out,


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Very Happy
Hi sorry I have not got back sooner.Yes the file had a txt extension .Once I had this info it all went according to plan. V3.2.1.all seems to run on Win95 ok, it is alittle slow at times but so is the bloke pushing the buttons.Next job is to wire up switch to change maps.

Many thanks again


Peter

View user's profile Send private message
Reply with quote
Post  
I'm having problems upgrading

I can get to DOS and have real comport (com 1) set as 9600,n,8,1,n

I run the loader program and it just sits and waits at the ACK

When I turn on the ignition (pwr) I get received 0x80 and the loader suggest try single wire.

Yet when I use

Hc08sprg com1:S mjljunior_V3.2.1.s19

it won;t recognizes the S

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum