4AGE Ignition Map Offering

Browse and share Ignition Configurations in this forum

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
dr.occa
Posts: 243
Joined: Fri Feb 23, 2007 10:52 pm
Location: TX

4AGE Ignition Map Offering

Post by dr.occa »

a little "birdie" hinted to me that some folks might be looking for more 4AGE maps.

the engine is a mixed up 4AGE: 16v hi-comp head+trd .8mm head gasket+complete AE101 (20v) bottom end = "1620"

-dual mikuni 44phh side draught carbs
-261 duration cams w/ .326 lift

i'll post up 2 maps with slight changes.
Attachments
4AGE-93octane-12-18-07.mjlj
(713 Bytes) Downloaded 1321 times
Top
dr.occa
Posts: 243
Joined: Fri Feb 23, 2007 10:52 pm
Location: TX

Post by dr.occa »

the second map
Attachments
4AGE-93octane-01-26-08.mjlj
(713 Bytes) Downloaded 1196 times
Top
brentp
Site Admin
Posts: 6282
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Thanks!

Your engine must sound wonderful at full tilt- I'd love to see / hear a video some time!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter
Top
COREdevelopments
Posts: 3
Joined: Tue Mar 18, 2008 12:00 am
Location: wales UK

Post by COREdevelopments »

thanks dr occa, i will try and download them and see how they perform on my setup.
thanks

rob
Top
Jaeshin1111
Posts: 3
Joined: Fri Jan 06, 2023 2:47 am

Re: 4AGE Ignition Map Offering

Post by Jaeshin1111 »

Thank you my engine run so much better and idles much better.. this map ends at 8000rpm but my engine was built to handle 10k rpm.. how can i adjust this?
Top
Post Reply

Return to “Ignition Map Library”