RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
No LED
Author Message
Reply with quote
Post No LED 
After about 12 months I dug my megajolt out of the cupboard. Couldn't remember where I go to, so re-tested all the voltages & all was okay. Fitted the IC's & connected it to my PC & power source on the bench, the LED does not light up but there is 4.98V across the terminals of it. The KPa is twitching & if I suck on the MAP sensor the needle swings round.

Is it likely that the LED has just blown or is there likely to be another problem somewhere else?

Alan..

View user's profile Send private message
Reply with quote
Post  
Try re-soldering the LED joints- if that does not work, try replacing it with another T-1 sized LED. you should be able to bend the leads so it still fits in the plastic carrier.


_________________
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum